SIM-AM 2025

Login / Register
Monday, 08 September, 2025
Mon, 08/09/2025
17:00 - 19:00
Pre-Registration
Mon, 08/09/2025
19:00 - 20:30
Welcome Reception
Tuesday, 09 September, 2025
Tue, 09/09/2025
08:00 - 08:45
Registration
Tue, 09/09/2025
08:45 - 09:00
Aula Magna
Opening Ceremony
Tue, 09/09/2025
09:00 - 10:30
Aula Magna
Plenary Lectures I
Tue, 09/09/2025
10:30 - 11:00
Coffee Break
Tue, 09/09/2025
11:00 - 13:00
Aula Magna
IS06A
IS06A Computational modeling of the additive manufacturing process and process parameter optimization I

Main Organizer: Prof. Peter Berke (Université libre de Bruxelles (ULB), Belgium)
Chaired by:
Prof. Peter Berke (Université libre de Bruxelles (ULB) , Belgium)
Tue, 09/09/2025
11:00 - 13:00
Aula 400
IS05A
IS05A Computational Design for Additive Manufacturing I

Main Organizer: Dr. Can Ayas (Delft University of Technology, Netherlands)
Chaired by:
Prof. Niels Aage (Technical university of Denmark , Denmark)
Tue, 09/09/2025
11:00 - 13:00
Aula Foscolo
IS04
IS04 Advances in the Design of Architectured Metamaterials

Main Organizer: Prof. Maria Laura De Bellis (University of Chieti-Pescara, Italy)
Tue, 09/09/2025
11:00 - 13:00
Aula Volta
IS23
IS23 Quantitative Optical Process Monitoring in Metal Additive Manufacturing

Main Organizer: Dr. Philipp Peter Breese (Bundesanstalt für Materialforschung und -prüfung (BAM), Germany)
Chaired by:
Dr. Philipp Peter Breese (Bundesanstalt für Materialforschung und -prüfung (BAM) , Germany) , Mr. Simon Oster (Bundesanstalt für Materialforschung und -prüfung , Germany)
Tue, 09/09/2025
11:00 - 13:00
Aula Scarpa
IS20A
IS20A Part-Scale Numerical and Experimental Analysis for Metal Additive Manufacturing I

Main Organizer: Prof. Michele Chiumenti (CIMNE/UPC, Spain)
Chaired by:
Dr. Massimo Carraturo (University of Pavia , Italy) , Prof. Michele Chiumenti (CIMNE/UPC , Spain)
Tue, 09/09/2025
11:00 - 13:00
Aula Studentesse
IS25A
IS25A Simulation and Modeling of the Fatigue Behavior of Metal Additive Manufactured Components I

Main Organizer: Prof. Matteo Benedetti (University of Trento, Italy)
Chaired by:
Prof. Ciro Santus (University of Pisa , Italy) , Dr. Raffaele De Biasi (Sapienza University of Rome , Italy)
Tue, 09/09/2025
13:00 - 14:00
Lunch Break
Tue, 09/09/2025
14:00 - 16:00
Aula Magna
IS06B
IS06B Computational modeling of the additive manufacturing process and process parameter optimization II

Main Organizer: Prof. Peter Berke (Université libre de Bruxelles (ULB), Belgium)
Chaired by:
Prof. Peter Berke (Université libre de Bruxelles (ULB) , Belgium)
Tue, 09/09/2025
14:00 - 16:00
Aula 400
IS05B
IS05B Computational Design for Additive Manufacturing II

Main Organizer: Dr. Can Ayas (Delft University of Technology, Netherlands)
Chaired by:
Dr. Oded Amir (Technion - Israel Institute of Technology , Israel)
Tue, 09/09/2025
14:00 - 16:00
Aula Foscolo
IS11A
IS11A Lattice and periodic structures I

Main Organizer: Prof. Giorgio De Pasquale (Politecnico di Torino, Italy)
Chaired by:
Prof. Giorgio De Pasquale (Politecnico di Torino , Italy) , Prof. Christian Mittelstedt (TU Darmstadt, FB16, FG LSM , Germany)
Tue, 09/09/2025
14:00 - 16:00
Aula Volta
IS33A
IS33A Benchmark Measurements and Model Validation I

Main Organizer: Dr. Lyle Levine (National Institute of Standards and Technology, United States)
Chaired by:
Dr. Lyle Levine (National Institute of Standards and Technology , United States) , Phd. Jake Benzing (National Institute of Standards and Technology , United States)
Tue, 09/09/2025
14:00 - 16:00
Aula Scarpa
IS20B
IS20B Part-Scale Numerical and Experimental Analysis for Metal Additive Manufacturing II

Main Organizer: Prof. Michele Chiumenti (CIMNE/UPC, Spain)
Chaired by:
Eng. Carlos A. Moreira (CIMNE , Spain) , Prof. Michel Bellet (MINES PARIS - PSL , France)
Tue, 09/09/2025
16:00 - 16:30
Coffee Break
Tue, 09/09/2025
16:30 - 18:30
Aula Magna
IS06C
IS06C Computational modeling of the additive manufacturing process and process parameter optimization III

Main Organizer: Prof. Peter Berke (Université libre de Bruxelles (ULB), Belgium)
Chaired by:
Prof. Peter Berke (Université libre de Bruxelles (ULB) , Belgium)
Tue, 09/09/2025
16:30 - 18:30
Aula Foscolo
IS11B
IS11B Lattice and periodic structures II

Main Organizer: Prof. Giorgio De Pasquale (Politecnico di Torino, Italy)
Chaired by:
Prof. Christian Mittelstedt (TU Darmstadt, FB16, FG LSM , Germany) , Prof. Giorgio De Pasquale (Politecnico di Torino , Italy)
Tue, 09/09/2025
16:30 - 18:30
Aula Scarpa
IS20C
IS20C Part-Scale Numerical and Experimental Analysis for Metal Additive Manufacturing III

Main Organizer: Prof. Michele Chiumenti (CIMNE/UPC, Spain)
Chaired by:
Prof. Stefan Kollmannsberger (Bauhaus University Weimar , Germany) , Prof. Michele Chiumenti (CIMNE/UPC , Spain)
Wednesday, 10 September, 2025
Wed, 10/09/2025
08:30 - 09:00
Registration
Wed, 10/09/2025
09:00 - 11:00
Aula Magna
IS10A
IS10A Generative Design and Topology Optimization for Multi-Scale and Multi-Material Additive Manufacturing Solutions I

Main Organizer: Dr. Oliver Giraldo-Londoño (University of Missouri, United States)
Chaired by:
Dr. Oliver Giraldo-Londoño (University of Missouri , United States) , Dr. Matteo Bruggi (Politecnico di Milano , Italy)
Wed, 10/09/2025
09:00 - 11:00
Aula 400
IS05C
IS05C Computational Design for Additive Manufacturing III

Main Organizer: Dr. Can Ayas (Delft University of Technology, Netherlands)
Chaired by:
Dr. Can Ayas (Delft University of Technology , Netherlands)
Wed, 10/09/2025
09:00 - 11:00
Aula Foscolo
IS31A
IS31A The Analysis and Optimization of (Heterogeneous) Meta-Materials/Lattices I

Main Organizer: Prof. Gershon Elber (Technion, Israel)
Chaired by:
Prof. Gershon Elber (Technion , Israel)
Wed, 10/09/2025
09:00 - 11:00
Aula Volta
IS07A
IS07A Data-Driven Modeling and Design of Additively Manufactured Materials and Structures I

Main Organizer: Prof. Markus Kästner (TU Dresden, Germany)
Chaired by:
Prof. Markus Kästner (TU Dresden , Germany) , Ms. Alexandra Otto (Dresden University of Technology , Germany)
Wed, 10/09/2025
09:00 - 11:00
Aula Scarpa
IS21A
IS21A Performance analysis and computational multiscale modeling of additively manufactured components I

Main Organizer: Dr. Narges Dialami (UPC-CIMNE, Spain)
Chaired by:
Dr. Narges Dialami (UPC-CIMNE , Spain) , Prof. Aleksander Czekanski (Mechanical Engineering, York University , Canada)
Wed, 10/09/2025
09:00 - 11:00
Sale delle Lauree
IS27A
IS27A The Need of a Connected Ecosystem to Harvest the Potential of AM in the Energy Sector

Main Organizer: Eng. Carlo De Bernardi (ConocoPhillips, United States)
Chaired by:
Mr. Brede Laerum (Equinor , Norway) , Eng. Carlo De Bernardi (ConocoPhillips , United States)
Wed, 10/09/2025
09:00 - 11:00
Aula Studentesse
IS18A
IS18A Numerical Investigations Of Wire-Arc Additive Manufacturing I

Main Organizer: Dr. Johannes Kronsteiner (Leichtmetallkompetenzzentrum Ranshofen GmbH, AIT, Austria)
Chaired by:
Dr. Johannes Kronsteiner (Leichtmetallkompetenzzentrum Ranshofen GmbH, AIT , Austria) , Mr. Fabio Haunreiter (LKR Ranshofen , Germany)
Wed, 10/09/2025
11:00 - 11:30
Coffee Break
Wed, 10/09/2025
11:30 - 13:00
Aula Magna
Plenary Lectures II
Wed, 10/09/2025
13:00 - 14:00
Lunch Break
Wed, 10/09/2025
14:00 - 16:00
Aula Magna
IS10B
IS10B Generative Design and Topology Optimization for Multi-Scale and Multi-Material Additive Manufacturing Solutions II

Main Organizer: Dr. Oliver Giraldo-Londoño (University of Missouri, United States)
Chaired by:
Dr. Matteo Bruggi (Politecnico di Milano , Italy) , Dr. Oliver Giraldo-Londoño (University of Missouri , United States)
Wed, 10/09/2025
14:00 - 16:00
Aula Foscolo
IS29
IS29 Architected and Origami-inspired Metamaterials and Structures

Main Organizer: Prof. Federico Bosi (University College London, United Kingdom)
Wed, 10/09/2025
14:00 - 16:00
Aula Volta
IS01A
IS01A Accelerating AM Process Simulation: Reduced Order Modeling, Deep Learning, and Novel Algorithms I

Main Organizer: Prof. Gregory Wagner (Northwestern University, United States)
Chaired by:
Prof. Gregory Wagner (Northwestern University , United States)
Wed, 10/09/2025
14:00 - 14:40
Aula Scarpa
IS21B
IS21B Performance analysis and computational multiscale modeling of additively manufactured components II

Main Organizer: Dr. Narges Dialami (UPC-CIMNE, Spain)
Chaired by:
Prof. Aleksander Czekanski (Mechanical Engineering, York University , Canada) , Dr. Narges Dialami (UPC-CIMNE , Spain)
Wed, 10/09/2025
14:00 - 16:00
Sale delle Lauree
IS12A
IS12A Microstructure evolution of alloys during additive manufacturing I

Main Organizer: Dr. Matthias Markl (FAU Erlangen-Nürnberg, Germany)
Chaired by:
Dr. Matthias Markl (FAU Erlangen-Nürnberg , Germany)
Wed, 10/09/2025
14:00 - 16:00
Aula Studentesse
GS01
GS01 Material Modeling

Main Organizer: Prof. Andrew McBride (University of Glasgow, United Kingdom)
Wed, 10/09/2025
14:40 - 16:00
Aula Scarpa
IS16A
IS16A Multiphysics and Multiscale Material Responses for 3D Printing: Characterization, Models, and Computational Approaches I

Main Organizer: Prof. Michele Marino (University of Rome Tor Vergata, Italy)
Chaired by:
Dr. Jorge Urrea (Technische Universität Braunschweig , Germany) , Prof. Michele Marino (University of Rome Tor Vergata , Italy)
Wed, 10/09/2025
16:00 - 16:30
Coffee Break
Wed, 10/09/2025
16:30 - 18:30
Aula Magna
GS03A
GS03A Design and Optimization I

Main Organizer: Prof. Ernst Rank (Technical University of Munich, Germany)
Chaired by:
Prof. Ernst Rank (Technical University of Munich , Germany)
Wed, 10/09/2025
16:30 - 18:50
Aula Foscolo
IS08
IS08 Digital Tools for Sustainable Concrete AM

Main Organizer: Dr. Oliver Barrowclough (SINTEF, Norway)
Chaired by:
Dr. Oliver Barrowclough (SINTEF , Norway)
Wed, 10/09/2025
16:30 - 18:30
Aula Volta
IS01B
IS01B Accelerating AM Process Simulation: Reduced Order Modeling, Deep Learning, and Novel Algorithms II

Main Organizer: Prof. Gregory Wagner (Northwestern University, United States)
Chaired by:
Dr. ZHENGTAO GAN (Arizona State University , United States)
Wed, 10/09/2025
16:30 - 18:30
Aula Scarpa
IS16B
IS16B Multiphysics and Multiscale Material Responses for 3D Printing: Characterization, Models, and Computational Approaches II

Main Organizer: Prof. Michele Marino (University of Rome Tor Vergata, Italy)
Chaired by:
Prof. Benjamin Klusemann (Helmholtz-Zentrum Hereon , Germany) , Phd. Elisabetta Monaldo (Roma Tre University , Italy)
Wed, 10/09/2025
16:30 - 18:50
Sale delle Lauree
IS12B
IS12B Microstructure evolution of alloys during additive manufacturing II

Main Organizer: Dr. Matthias Markl (FAU Erlangen-Nürnberg, Germany)
Chaired by:
Dr. Fan Zhang (National Institute of Standards and Technology , United States)
Wed, 10/09/2025
20:30 - 23:00
Conference Dinner
Thursday, 11 September, 2025
Thu, 11/09/2025
08:30 - 09:00
Registration
Thu, 11/09/2025
09:00 - 10:30
Aula Magna
Plenary Lecture III
Thu, 11/09/2025
10:30 - 11:00
Coffee Break
Thu, 11/09/2025
11:00 - 13:00
Aula Magna
GS03B
GS03B Design and Optimization II

Main Organizer: Prof. Ernst Rank (Technical University of Munich, Germany)
Chaired by:
Prof. Markus Kästner (TU Dresden , Germany)
Thu, 11/09/2025
11:00 - 13:00
Aula 400
GS02A
GS02A Process Simulation I

Main Organizer: Prof. Stefan Kollmannsberger (Bauhaus University Weimar, Germany)
Chaired by:
Mr. Philipp Kopp (Bauhaus-Universität Weimar , Germany) , Prof. Stefan Kollmannsberger (Bauhaus University Weimar , Germany)
Thu, 11/09/2025
11:00 - 13:00
Aula Foscolo
IS26A
IS26A Simulation for Additive Manufacturing in Construction I

Main Organizer: Prof. Ernst Rank (Technical University of Munich, Germany)
Chaired by:
Prof. Ernst Rank (Technical University of Munich , Germany)
Thu, 11/09/2025
11:00 - 13:00
Aula Volta
IS07B
IS07B Data-Driven Modeling and Design of Additively Manufactured Materials and Structures II

Main Organizer: Prof. Markus Kästner (TU Dresden, Germany)
Chaired by:
Prof. Julia Hufenbach (Leibniz Institute for Solid State and Materials Research & TU Bergakademie Freiberg , Germany) , Ms. Ulrike Gebhardt (TUD Dresden University of Technology , Germany)
Thu, 11/09/2025
11:00 - 13:00
Aula Scarpa
IS15A
IS15A Multi-Scale Modelling of Additively Manufactured Materials to Link Material Processing and Mechanical Responses I

Main Organizer: Prof. Enrico Salvati (University of Udine, Italy)
Chaired by:
Prof. Enrico Salvati (University of Udine , Italy) , Dr. Chinnapat Panwisawas (Queen Mary University of London , United Kingdom)
Thu, 11/09/2025
11:00 - 13:00
Sale delle Lauree
IS30
IS30 Additive Manufacturing & Aerospace: Opportunities and Challenges for Future Scenario

Main Organizer: Phd. Stefania Franchitti (Italian Aerospace Research Center, Italy)
Thu, 11/09/2025
13:00 - 14:00
Lunch Break
Thu, 11/09/2025
14:00 - 16:00
Aula Magna
IS17
IS17 New applications of topology optimization in the context of additive manufacturing

Main Organizer: Prof. Grégoire Allaire (Ecole Polytechnique, France)
Chaired by:
Mr. Alex Ferrer (CIMNE, Barcelona , Spain) , Prof. Grégoire Allaire (Ecole Polytechnique , France)
Thu, 11/09/2025
14:00 - 16:00
Aula 400
GS02B
GS02B Process Simulation II

Main Organizer: Prof. Stefan Kollmannsberger (Bauhaus University Weimar, Germany)
Chaired by:
Prof. Stefan Kollmannsberger (Bauhaus University Weimar , Germany) , Mr. Philipp Kopp (Bauhaus-Universität Weimar , Germany)
Thu, 11/09/2025
14:00 - 16:20
Aula Foscolo
IS26B
IS26B Simulation for Additive Manufacturing in Construction II

Main Organizer: Prof. Ernst Rank (Technical University of Munich, Germany)
Chaired by:
Prof. Stefan Kollmannsberger (Bauhaus University Weimar , Germany)
Thu, 11/09/2025
14:00 - 16:00
Aula Volta
IS07C
IS07C Data-Driven Modeling and Design of Additively Manufactured Materials and Structures III

Main Organizer: Prof. Markus Kästner (TU Dresden, Germany)
Chaired by:
Prof. Oliver Weeger (TU Darmstadt , Germany) , Ms. Alexandra Otto (Dresden University of Technology , Germany)
Thu, 11/09/2025
14:00 - 16:00
Aula Scarpa
IS15B
IS15B Multi-Scale Modelling of Additively Manufactured Materials to Link Material Processing and Mechanical Responses II

Main Organizer: Prof. Enrico Salvati (University of Udine, Italy)
Chaired by:
Dr. Chinnapat Panwisawas (Queen Mary University of London , United Kingdom) , Prof. Enrico Salvati (University of Udine , Italy)
Thu, 11/09/2025
14:00 - 16:00
Sale delle Lauree
IS34
IS34 Additive Manufacturing of Intelligent Materials

Main Organizer: Prof. Dario Pisignano (University of Pisa, Italy)
Thu, 11/09/2025
16:00 - 16:30
Coffee Break
Tuesday, 09 September, 2025
Tue, 09/09/2025
16:30 - 17:30
Aula Volta
IS33B
IS33B Benchmark Measurements and Model Validation II

Main Organizer: Dr. Lyle Levine (National Institute of Standards and Technology, United States)
Chaired by:
Dr. Matthew Dantin (Naval Surface Warfare Center Carderock Division , United States) , Dr. Jesse Redford (NIST , United States)
Tue, 09/09/2025
17:30 - 18:50
Aula Volta
IS02
IS02 Advanced Characterization Methods for Validation and Verification

Main Organizer: Prof. Carmine Maletta (University of Calabria , Italy)
Chaired by:
Prof. Niels Aage (Technical university of Denmark , Denmark) , Dr. Mamzi Afrasiabi (ETH Zurich , Switzerland)

Copyright © 2022 CIMNE, All Rights Reserved.
Terms of service